Schneider-Electric
Discover BMXAMO0802H by
 
BMXAMO0802H picture- scope
BMXAMO0802H
analog non isolated high level output module, Modicon X80, 8 outputs, 0 to 20mA, 4 to 20mA, for severe environments
Schneider Electric
Characteristics
Main
Range of product Modicon X80
Product or component type Analog output module
Product specific application For severe environments
Electrical connection 20 ways 1 connector
Isolation between channels Non isolated
Complementary
Measurement error <= 0.45 % of full scale - 25...70 °C
0.1 % of full scale 25 °C
Temperature drift 45 ppm/°C 0...20 mA
45 ppm/°C 4...20 mA
Minimum crosstalk attenuation 80 dB
Common mode rejection 80 dB
Isolation voltage 1400 V DC between channels and ground
1400 V DC between channels and bus
Detection type Open circuit 4...20 mA
Short circuit 0...20 mA
Load impedance ohmic <= 350 Ohm 0...20 mA
<= 350 Ohm 4...20 mA
Analogue output number 8
Analogue output type Current: 0...20 mA
Current: 4...20 mA
Analogue output resolution 16 bits
Supply Internal power supply via rack
Conversion time <= 4 ms
Maximum conversion value 0...21 mA 0...20 mA
0...21 mA 4...20 mA
Fallback mode Configurable
Predefined
MTBF reliability 1500000 H
Operating altitude 0...2000 m
2000...5000 m with derating factor
Status LED 1 LED (green) RUN
1 LED per channel (green) channel diagnostic
1 LED (red) ERR
1 LED (red) I/O
Net weight 0.15 kg
Power consumption in W 3.6 W 24 V DC typical
3.9 W 24 V DC maximum
0.35 W 3.3 V DC typical
0.48 W 3.3 V DC maximum
Current consumption 150 mA at 3.3 V DC
135 mA at 24 V DC
Environment
Vibration resistance 3 gn
Shock resistance 30 gn
Ambient air temperature for storage -40…85 °C
Ambient air temperature for operation -25…70 °C
Relative humidity 5…95 % at 55 °C without condensation
IP degree of protection IP20
Product certifications Merchant Navy
ATEX
CE
CSA
EAC
RCM
IEC-Ex
UL
Standards EN 61131-2
EN 61000-6-4
EN 61000-6-2
EN 61010-2-201
Environmental characteristic Gas resistant class Gx
Gas resistant class 3C4
Dust resistant class 3S4
Sand resistant class 3S4
Salt resistant level 2
Mold growth resistant class 3B2
Fungal spore resistant class 3B2
Hazardous location class I division 2
Protective treatment Conformal coating
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 5.300 cm
Package 1 Width 11.000 cm
Package 1 Length 11.500 cm
Package 1 Weight 180.000 g
Unit Type of Package 2 S02
Number of Units in Package 2 15
Package 2 Height 15.000 cm
Package 2 Width 30.000 cm
Package 2 Length 40.000 cm
Package 2 Weight 3.080 kg
Offer Sustainability
Packaging without single use plastic Yes
Packaging made with recycled cardboard Yes
REACh Regulation
print REACh Declaration
EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free Yes
RoHS exemption information
print Yes
China RoHS Regulation
print China RoHS declaration
Environmental Disclosure
print Product Environmental Profile
Circularity Profile
print End of Life Information
WEEE The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
California proposition 65 WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Take-back No
Carbon footprint (kg CO2 eq, Total Life cycle) 226