Schneider-Electric
 
ABL1RPM24042 picture- web-product-data-sheet
ABL1RPM24042
regulated SMPS, single phase, 100..240 V input, 24 V output, 100 W
Schneider Electric
Characteristics
Main
Range of product Phaseo Dedicated
Product or component type Power supply
Power supply type Regulated switch mode
Rated power in W 100 W
Main Input Voltage 100...240 V AC single phase
120...370 V DC
Output voltage 24 V DC
Power supply output current 4.2 A
Operating position Any position
Vibration resistance 2 gn (f= 9…150 Hz) conforming to EN/IEC 61131-2
3.5 mm (f= 5…9 Hz) conforming to EN/IEC 61131-2
Name of test Conducted interference conforming to EN 61000-4-8 level 4
Electrostatic discharges conforming to EN/IEC 61000-4-2 level 3
Induced electromagnetic field conforming to EN/IEC 61000-4-6 level 3
Radiated electromagnetic field conforming to EN/IEC 61000-4-3 level 3
Rapid transient conforming to IEC 61000-4-4 level 3
Conducted/radiated emissions conforming to EN 55022 class B
Conducted/radiated emissions conforming to EN/IEC 55011
Emission conforming to EN/IEC 61000-6-3
Primary outage conforming to IEC 61000-4-11
Surge conforming to EN/IEC 61000-4-5
Complementary
Input voltage limits 85...264 V
Network frequency 47...63 Hz
Inrush current 50 A at 115 V AC
100 A at 230 V AC
Cos phi 0.7…0.95
Efficiency 80 %
Power dissipation in W 25 W
Current consumption 0.7 A at 240 V
1.7 A at 100 V
Input protection type Integrated fuse (not interchangeable)
Output voltage limits 21.6...26.4 V
Line and load regulation +/- 3 %
Holding time >= 10 ms at 100 V
>= 40 ms at 240 V
Output protection type Against overload, protection technology: 1.1...1.5 x In
Against overvoltage, protection technology: tripping if U > 1.25 x Un
Against short-circuits, protection technology: automatic reset
Thermal
Connections - terminals For ground connection: screw type terminals, connection capacity: 1 x 4 mm² AWG 12
For input connection: screw type terminals, connection capacity: 2 x 4 mm² AWG 12
For output connection: screw type terminals, connection capacity: 4 x 4 mm² AWG 12
Marking CE
Mounting support Reversible mounting bracket
Panel
Operating altitude 2000 m
Output coupling Parallel
Series
Overvoltage category II
Meantime between failure [MTBF] 100000 h at 40 °C
Status LED 1 LED (green) output voltage
Net weight 0.64 kg
Environment
Product certifications TUV 60950-1
RCM
UL 508
cCSAus
CSA 22-2 No 60950-1
KC
EAC
Environmental characteristic EMC conforming to EN 50081-1
EMC conforming to EN 50082-2
EMC conforming to EN 61000-6-3
EMC conforming to EN/IEC 61000-6-2
Safety conforming to EN/IEC 60950-1
Safety conforming to SELV
Low frequency harmonic currents conforming to EN/IEC 61000-3-2
IP degree of protection IP20 conforming to EN/IEC 60950
Ambient air temperature for operation 0…45 °C (without derating)
45…60 °C (with derating factor)
Ambient air temperature for storage -25…85 °C
Relative humidity 20…90 %
Overvoltage category Class I conforming to VDE 0106-1
Pollution degree 2
Dielectric strength 1500 V between input and ground
3000 V between input and output
500 V between output and ground
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 5.3 cm
Package 1 Width 12 cm
Package 1 Length 23.5 cm
Package 1 Weight 727 g
Offer Sustainability
SCIP Number Fe64e454-324e-4d95-961c-5ccceb461cf0
EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free Yes
RoHS exemption information
print Yes
China RoHS Regulation
print China RoHS declaration
Environmental Disclosure
print Product Environmental Profile
Circularity Profile
print End of Life Information
California proposition 65 WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Contractual warranty
Warranty 18 months