Schneider-Electric
 
ABL8RED24400 picture- web-product-data-sheet
ABL8RED24400
redundancy module, phaseo ABL7 ABL8, 40A, for regulated SMPS
Schneider Electric
Characteristics
Main
Range of product Phaseo
Product or component type Redundancy module
Input voltage 24...28.8 V DC
Output voltage (Uin-0.2) V DC
Maximum output current 40 A
Complementary
Input voltage limits 22...30 V
Input current 20 A
Number of output channels 1
Output protection type Against overload, protection technology: external protection by power supply
Against short-circuits, protection technology: external protection by power supply
Connections - terminals For output connection: screw type terminals, connection capacity: 2 x 0.5...2 x 10 mm² AWG 20...AWG 8
For input connection: screw type terminals, connection capacity: 4 x 0.5...4 x 10 mm² AWG 20...AWG 8
For diagnostic relay: removable screw terminal block, connection capacity: 1 x 2.5 mm² AWG 14
Fixing mode By clips on 35 mm symmetrical DIN rail, operating position: horizontal
By clips on 35 mm symmetrical DIN rail, operating position: vertical
Output coupling Parallel
Operating altitude 2000 m
Marking CE
Name of test Electrostatic discharges conforming to IEC 61000-4-2
Emission conforming to IEC 61000-6-3
Induced electromagnetic field conforming to IEC 61000-4-6 level 3
Radiated electromagnetic field conforming to IEC 61000-4-3 level 3
Rapid transient conforming to IEC 61000-4-4 level 3
Surge conforming to IEC 61000-4-5 level 2
Conducted/radiated emissions conforming to EN 55022 class B
Emission conforming to EN 50081-1
Local signalling 1 LED per input (green) for power supply status
1 relay for power supply status
Net weight 0.7 kg
Environment
Product certifications EAC
RCM
Standards CSA C22.2 No 60950-1
UL 508
Ambient air temperature for operation -25…60 °C
Ambient air temperature for storage -40…85 °C
Environmental characteristic EMC conforming to IEC 61000-6-3
EMC conforming to IEC 61000-6-2
Safety conforming to IEC 60950-1
Safety conforming to EN/IEC 61204
IP degree of protection IP20 conforming to IEC 60529
Dielectric strength 500 V between input and ground
500 V between output and ground
Overvoltage category Class II conforming to VDE 0106-1
Relative humidity 0…90 % during operation
0…95 % during storage
MTBF reliability 2488391 H at 24 V DC with UTE C80-810 calculation method
Vibration resistance 2 gn (f= 11.9…150 Hz) conforming to IEC 61131-2
3.5 mm (f= 3…11.9 Hz) conforming to IEC 61131-2
Packing Units
Unit Type of Package 1 PCE
Number of Units in Package 1 1
Package 1 Height 7.000 cm
Package 1 Width 16.800 cm
Package 1 Length 16.600 cm
Package 1 Weight 644.000 g
Unit Type of Package 2 S03
Number of Units in Package 2 10
Package 2 Height 30.000 cm
Package 2 Width 30.000 cm
Package 2 Length 40.000 cm
Package 2 Weight 6.800 kg
Unit Type of Package 3 S06
Number of Units in Package 3 80
Package 3 Height 75.000 cm
Package 3 Width 60.000 cm
Package 3 Length 80.000 cm
Package 3 Weight 65.160 kg
Offer Sustainability
SCIP Number A510c661-ab71-4b35-aa55-069b0716f9fc
REACh Regulation
print REACh Declaration
EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope)
Mercury free Yes
RoHS exemption information
print Yes
China RoHS Regulation
print China RoHS declaration
California proposition 65 "WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov"
Contractual warranty
Warranty 18 months