|
Compatibility code
|
LC1D
|
|
Pole contact composition
|
2 NO + 2 NC
|
|
Protective cover
|
With
|
|
[Ith] conventional free air thermal current
|
60 A (at 60 °C) for power circuit
|
|
Irms rated making capacity
|
800 A at 440 V for power circuit conforming to IEC 60947
|
|
Rated breaking capacity
|
800 A at 440 V for power circuit conforming to IEC 60947
|
|
[Icw] rated short-time withstand current
|
320 A 40 °C - 10 s for power circuit
720 A 40 °C - 1 s for power circuit
72 A 40 °C - 10 min for power circuit
165 A 40 °C - 1 min for power circuit
|
|
Associated fuse rating
|
80 A gG at <= 690 V coordination type 1 for power circuit
80 A gG at <= 690 V coordination type 2 for power circuit
|
|
Average impedance
|
1.5 mOhm - Ith 60 A 50 Hz for power circuit
|
|
Power dissipation per pole
|
5.4 W AC-1
|
|
[Ui] rated insulation voltage
|
Power circuit: 600 V CSA certified
Power circuit: 600 V UL certified
Power circuit: 690 V conforming to IEC 60947-4-1
|
|
Overvoltage category
|
III
|
|
Pollution degree
|
3
|
|
[Uimp] rated impulse withstand voltage
|
6 kV conforming to IEC 60947
|
|
Safety reliability level
|
B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1
B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
|
|
Mechanical durability
|
6 Mcycles
|
|
Electrical durability
|
1.4 Mcycles 60 A AC-1 at Ue <= 440 V
|
|
Control circuit type
|
AC at 50/60 Hz
|
|
Coil technology
|
Without built-in suppressor module
|
|
Control circuit voltage limits
|
0.3...0.6 Uc (-40…55 °C):drop-out AC 50/60 Hz
0.8...1.1 Uc (-40…55 °C):operational AC 50 Hz
0.85...1.1 Uc (-40…55 °C):operational AC 60 Hz
|
|
Inrush power in VA
|
245 VA 60 Hz cos phi 0.75 (at 20 °C)
245 VA 50 Hz cos phi 0.75 (at 20 °C)
|
|
Hold-in power consumption in VA
|
13 VA 60 Hz cos phi 0.3 (at 20 °C)
15 VA 50 Hz cos phi 0.3 (at 20 °C)
|
|
Heat dissipation
|
4…5 W at 50/60 Hz
|
|
Operating time
|
4...19 ms opening
12...26 ms closing
|
|
Maximum operating rate
|
3600 cyc/h at 60 °C
|
|
Connections - terminals
|
Control circuit: screw clamp terminals 2 1…2.5 mm² - cable stiffness: flexible with cable end
Control circuit: screw clamp terminals 1 1…4 mm² - cable stiffness: flexible without cable end
Control circuit: screw clamp terminals 2 1…4 mm² - cable stiffness: flexible without cable end
Control circuit: screw clamp terminals 1 1…4 mm² - cable stiffness: flexible with cable end
Control circuit: screw clamp terminals 1 1…4 mm² - cable stiffness: solid without cable end
Control circuit: screw clamp terminals 2 1…4 mm² - cable stiffness: solid without cable end
Power circuit: screw clamp terminals 1 2.5…25 mm² - cable stiffness: flexible without cable end
Power circuit: screw clamp terminals 2 2.5…16 mm² - cable stiffness: flexible without cable end
Power circuit: screw clamp terminals 1 2.5…25 mm² - cable stiffness: flexible with cable end
Power circuit: screw clamp terminals 2 2.5…10 mm² - cable stiffness: flexible with cable end
Power circuit: screw clamp terminals 1 2.5…25 mm² - cable stiffness: solid without cable end
Power circuit: screw clamp terminals 2 2.5…16 mm² - cable stiffness: solid without cable end
|
|
Tightening torque
|
Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm
Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2
Power circuit: 8 N.m - on screw clamp terminals - cable 25…35 mm² hexagonal screw head 4 mm
Power circuit: 5 N.m - on screw clamp terminals - cable 1…25 mm² hexagonal screw head 4 mm
Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver pozidriv No 2
|
|
Mounting support
|
Plate
Rail
|
|
Standards
|
EN 60947-4-1
EN 60947-5-1
IEC 60947-4-1
IEC 60947-5-1
UL 60947-4-1
UL 60947-5-1
CSA C22.2 No 60947-4-1
CSA C22.2 No 60947-5-1
GB/T 14048.4
|
|
Product certifications
|
UL
CSA
CCC
EAC
UKCA
CB
EU-RO-MR by DNV-GL
|
|
IP degree of protection
|
IP20 front face conforming to IEC 60529
|
|
Protective treatment
|
TH conforming to IEC 60068-2-30
|
|
Climatic withstand
|
Conforming to IACS E10 exposure to damp heat
|
|
Permissible ambient air temperature around the device
|
-40…60 °C
60…70 °C with derating
|
|
Operating altitude
|
0...3000 m
|
|
Fire resistance
|
850 °C conforming to IEC 60695-2-1
|
|
Flame retardance
|
V1 conforming to UL 94
|
|
Mechanical robustness
|
Shocks contactor open (8 Gn for 11 ms)
Shocks contactor closed (10 Gn for 11 ms)
Vibrations contactor opened (2 Gn, 5...300 Hz)
Vibrations contactor closed (4 Gn, 5...300 Hz)
|
|
Height
|
127 mm
|
|
Width
|
85 mm
|
|
Depth
|
125 mm
|
|
Product weight
|
1.44 kg
|
|
Packaging without single use plastic
|
Yes
|
|
Packaging made with recycled cardboard
|
Yes
|
|
REACh Regulation
|
 REACh Declaration
|
|
REACh free of SVHC
|
Yes
|
|
EU RoHS Directive
|
Compliant
EU RoHS Declaration
|
|
Toxic heavy metal free
|
Yes
|
|
Mercury free
|
Yes
|
|
Sustainable packaging
|
Yes
|
|
RoHS exemption information
|
Yes
|
|
China RoHS Regulation
|
China RoHS declaration
|
|
Environmental Disclosure
|
Product Environmental Profile
|
|
Circularity Profile
|
No need of specific recycling operations
|
|
WEEE
|
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
|
|
California proposition 65
|
WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
|
|
Take-back
|
No
|
|
Carbon footprint (kg CO2 eq, Total Life cycle)
|
78
|
